Overview
Stock number:
PF 39891
Categories:
Geotechnical Drilling Rigs
Manufacturer:
Boart Longyear
Model:
LS250 Mini Sonic
Year of manufacture:
2017
Key Features:
Key features
- Sonic Drilling Rig with 4254 Engine hours
- Single sonic drill head hours 3000 hours
- Installed Power 119 kW / 160 hp
- Working pressure 5000 psi
- Feed push 24 kN
- Feed pull 68 kN
- Feed length 4 Meters
- Max casing length 3 meters
- Capable of drilling to depths of up to 78m when used with 4.75 inch (121mm) casing
- Max depth in 6 inch (150mm) casing is 61 meters
- Max drilling diameter 305mm
- Frequency range 0-75 Hz
- Wide low ground pressure 600mm rubber tracks
- CE marked
Sonic Tooling:
| CORE BARRELS |
| 1x 4.75" (120.7mm) x 1.5 |
| 2x 4.75" (120.7mm) x 3m |
| 1x 6" (152.4mm) x 1.5m |
| 2x 6" (152.4mm) x 3m |
| 2x 7" (177.8mm) x 3m |
| DRILL RODS 3.5 inch standard |
| 5x 1.5m Rods |
| 18x 3m rods |
| CASING |
| 1x 6" x 0.6m |
| 1x 6" x 1.5m |
| 19x 6" x 3m |
| 1x 8" x 0.5m |
| 1x 8" X 1.5m |
| 17x 8" x 3m |
| CORE BARREL BITS |
| 2x 4.75" with wear pad |
| 2x 4.75" Full Face |
| 6" HD Core Barrel Bit |
| 4x 7" with wear pad |
| 1x Auger C/BBL 7" RH |
| FLAPPER CORE BARREL BITS |
| 1x 4.75" |
| 1x 6" |
| CASING SHOES |
| 1x 6" with wear pad |
| 1x 6" Sandstone casing shoe |
| 4x 8" with wear pad |
| 1x 10.5" |
| BARREL ADAPTERS |
| 1x 3.5" RH x 4.75" RH |
| 1x 6" box X 10"pin |
| 1x Thread sub-saver (casing) 6inch LH box X 6inch LH pin X 18inch |
| 1x Lifting bale 3.5inch drill rod pin |
| 1x Head Adapter Mini |
| 1x Bolt-on sub-saver, standard flange adapter 3.5inch RH X LH bolt on sub-saver |
| 1x ADAP C/BBL 3 1/2" RH X 7" RH |
| CASING ADAPTERS |
| 1x 6"Box - 8"Pin |
| 1x CDG JNT 8" LH X .5m |
| COREBARREL ADAPTER |
| 1x 3.5"Box - 7" CB pin |
| 1x 6"Box - 8"Pin |
